Applied Element Method (AEM)
  • Home
  • Applications
    • Structural Vulnerability Assessment
    • Performance Based Design
    • Glass Performance Analysis
    • Forensic Structural Engineering
    • Demolition Analysis
    • Visual Effects
  • Publications
    • Journals
    • Conferences
    • Bullitins
    • Other Publications
  • Resources
Select Page

Aided Design of Framed Reinforced Concrete Structures Subjected to Flood Scouring

by Applied Element Method | Nov 16, 2011 | Journals

In the beginning of 2010, several reinforced concrete structures collapsed due to floods in Sinai and Aswan, Egypt. Scour of soil beneath foundations lead to excessive differential settlements, failure of main structural members and finally complete structural...

Toward an Economic Design of Reinforced Concrete Structures Against Progressive Collapse

by Applied Element Method | Jul 30, 2011 | Journals

Athree-dimensional discrete crack model based on the Applied Element Method is used to perform economic design for reinforced concrete structures against progressive collapse. The model adopts fully nonlinear path-dependent constitutive models for concrete and...

Aspects Concerning Progressive Collapse of a Reinforced Concrete Frame Structure with Infill Walls

by Applied Element Method | Jul 8, 2011 | Conferences

The present paper proposes modern approaches, nonlinear static and dynamic analysis procedures based on the Applied Element Method, to assess a progressive collapse problem of a RC frame structure with infill walls. Comparisons between the results of modeling...

Alternate Path Progressive Collapse Analysis of Steel Stud Bearing Wall Structures

by Applied Element Method | Apr 30, 2011 | Conferences

The Alternate Path Method is used to examine the vulnerability of a 5-story barracks building to progressive collapse based on DoD criteria UFC-4-023-03. The building is composed of composite deck floor system and steel roof trusses, all supported by cold-formed steel...

Performance-Based Seismic Vulnerability Evaluation Of Existing Buildings In Old Sectors Of Quebec

by Applied Element Method | Jul 20, 2010 | Other Publications, Thesis

Masonry is a construction material widely used around the world. Although its poor behavior under seismic loads has been extensively reported, masonry is used in earthquake prone areas mainly due to its relatively low cost. In order to improve the seismic performance...
« Older Entries
Next Entries »

Categories

  • Bulletins
  • Conferences
  • Journals
  • Other Publications
  • Thesis
  • Uncategorized

Recent Posts

  • Modelling the in-plane/out-of-plane interaction of brick and stone masonry structures using Applied Element Method
  • Reliability of collapse simulation – Comparing finite and applied element method at different levels
  • Research and Practice on Progressive Collapse and Robustness of Building Structures in the 21st Century
  • Using the Applied Element Method to simulate the dynamic response of full-scale URM houses tested to collapse or near-collapse conditions
  • The Applied Element Method and the modelling of both in-plane and out-of-plane response of URM walls

Archives

  • Applications
  • Publications
  • Resources
  • Contact
  • Policies
  • RSS
© 2004-2020 Applied Element Method | Powered by AEM - Advanced Nonlinear Dynamic Numerical Analysis