Applied Element Method (AEM)
  • Home
  • Applications
    • Structural Vulnerability Assessment
    • Performance Based Design
    • Glass Performance Analysis
    • Forensic Structural Engineering
    • Demolition Analysis
    • Visual Effects
  • Publications
    • Journals
    • Conferences
    • Bullitins
    • Other Publications
  • Resources
Select Page

Verification of Masonry Properties in AEM Analysis for Brick Infilled Reinforced Concrete Frames

by Applied Element Method | Jul 30, 2015 | Conferences

The present study focuses on the verification of masonry constituent properties for analytical investigation of the in-plane cyclic behavior of brick infilled RC frames in AEM.  The material properties were established and validated for bricks and mortar under...

Numerical Collapse Analysis of Tsuyagawa Bridge Damaged by Tohoku Tsunami

by Applied Element Method | Jul 29, 2015 | Conferences

The collapse of Tsuyagawa bridge damaged by Tohoku Tsunami is numerically investigated using the Applied Element Method, due to its advantages of simulating structural progressive collapse. The analysis was proven to simulate the bridge collapse.  It showed that the...

Progressive Collapse Assessment of Multi-Story Flat Slab Reinforced Concrete Structures under Gravity Loads

by Applied Element Method | Jul 28, 2015 | Conferences

The resistance of multi-slory RC flal slab structures to progressive collapse is numerically evaluated using Appled Element Method. The case study was desiged according to ACI 318 and its progressive collapse was assesed in accordance to the UFC guidelines.  The...

Infilled Masonry Walls Contribution in Mitigating Progressive Collapse of multistory Reinforced Concrete Structures According to UFC Guidelines

by Applied Element Method | Jun 29, 2015 | Journals

Astructure is subjected to progressive collapse when an element fails, resulting in failure of adjoining structural elements which, in their turn, cause further structural failure leading eventually to partial or total collapse. The failure of a primary vertical...

Post-Fracture Response of Blast Loaded Monolithic Glass

by Applied Element Method | Mar 27, 2015 | Conferences

This paper investigates transient dynamic loading and response of glazing panels. This is a complex phenomenon dependent upon material properties, structural arrangement and proximity to the explosive source. To date, modelling glazing breakup and post-fracture...
« Older Entries
Next Entries »

Categories

  • Bulletins
  • Conferences
  • Journals
  • Other Publications
  • Thesis
  • Uncategorized

Recent Posts

  • Modelling the in-plane/out-of-plane interaction of brick and stone masonry structures using Applied Element Method
  • Reliability of collapse simulation – Comparing finite and applied element method at different levels
  • Research and Practice on Progressive Collapse and Robustness of Building Structures in the 21st Century
  • Using the Applied Element Method to simulate the dynamic response of full-scale URM houses tested to collapse or near-collapse conditions
  • The Applied Element Method and the modelling of both in-plane and out-of-plane response of URM walls

Archives

  • Applications
  • Publications
  • Resources
  • Contact
  • Policies
  • RSS
© 2004-2020 Applied Element Method | Powered by AEM - Advanced Nonlinear Dynamic Numerical Analysis