Applied Element Method (AEM)
  • Home
  • Applications
    • Structural Vulnerability Assessment
    • Performance Based Design
    • Glass Performance Analysis
    • Forensic Structural Engineering
    • Demolition Analysis
    • Visual Effects
  • Publications
    • Journals
    • Conferences
    • Bullitins
    • Other Publications
  • Resources
Select Page

Performance-Based Seismic Vulnerability Evaluation of Masonry Buildings Using Applied Element Method in a Nonlinear Dynamic-Based Analytical Procedure

by Applied Element Method | May 30, 2013 | Journals

Athorough four-step performance-based seismic evaluation for a six-story unreinforced masonry building is conducted. Incremental dynamic analysis is carried out using the applied element method to take advantage of its ability to simulate progressive collapse of the...

Application of the Applied Element Method to the Seismic Vulnerability Evaluation of Existing Buildings

by Applied Element Method | Jun 16, 2008 | Conferences

As an approach to the problem of seismic vulnerability evaluation of existing buildings through the predicted vulnerability method, analytical models can be applied to define the capacity curves of typical buildings which represent different building classes. These...

Simulation of the Alfred P. Murrah Federal Building Collapse Due to Blast Loads

by Applied Element Method | Apr 1, 2006 | Conferences

Many trials have been made to numerically simulate the Alfred P. Murrah Building bombing event using Finite Element Method. These trials were based on removal of one of the main supporting columns to investigate the generated internal forces and the possible...

Categories

  • Bulletins
  • Conferences
  • Journals
  • Other Publications
  • Thesis
  • Uncategorized

Recent Posts

  • Modelling the in-plane/out-of-plane interaction of brick and stone masonry structures using Applied Element Method
  • Reliability of collapse simulation – Comparing finite and applied element method at different levels
  • Research and Practice on Progressive Collapse and Robustness of Building Structures in the 21st Century
  • Using the Applied Element Method to simulate the dynamic response of full-scale URM houses tested to collapse or near-collapse conditions
  • The Applied Element Method and the modelling of both in-plane and out-of-plane response of URM walls

Archives

  • Applications
  • Publications
  • Resources
  • Contact
  • Policies
  • RSS
© 2004-2020 Applied Element Method | Powered by AEM - Advanced Nonlinear Dynamic Numerical Analysis