Applied Element Method (AEM)
  • Home
  • Applications
    • Structural Vulnerability Assessment
    • Performance Based Design
    • Glass Performance Analysis
    • Forensic Structural Engineering
    • Demolition Analysis
    • Visual Effects
  • Publications
    • Journals
    • Conferences
    • Bullitins
    • Other Publications
  • Resources
Select Page

Response of a Reinforced Concrete Infilled-Frame Structure to Removal of Two Adjacent Columns

by Applied Element Method | Sep 30, 2008 | Journals

The response of Hotel San Diego, a six-story reinforced concrete infilled-frame structure, is evaluated following the simultaneous removal of two adjacent exterior columns. Analytical models of the structure using the Finite Element Method as well as the Applied...

Voronoi Applied Element Method for Structural Analysis: Theory and Application for Linear and Non-linear Materials

by Applied Element Method | Mar 30, 2006 | Bulletins

DVoronoi Applied Element Method (VAEM) has been developed based on previous Appleid Element Method (AEM). Comparing to the original AEM, the advantage of VAEM can be described as the followings: the boundary of VAEM domain can fit to any type of domain easily,...

Assessment Of Seismic Damage To Railway Structures Using Applied Element Method And Microtremor Measurement

by Applied Element Method | Aug 6, 2004 | Conferences

Methods to assess the seismic damage to railway structures were proposed in order to reduce the overall seismic damage of railway system. First, a tool for seismic performance assessment (pre-earthquake assessment) of RC structures with/without retrofit operation was...

Simulation Of Brick Masonry Wall Behavior Under Inplane Lateral Loading Using Applied Element Method

by Applied Element Method | Aug 6, 2004 | Conferences

Failure of masonry buildings is considered as the major cause of the large number of casualties during the past earthquakes around the world. Masonry constructions are still in practice even in highly seismic regions. Understanding of masonry wall behavior under...

3-Dimensional Applied Element Simulation of Failure Behavior of Structures

by Applied Element Method | Dec 16, 1999 | Bulletins

Kimiro Meguro and Hatem Tagel-Din: 3-Dimensional Applied Element Simulation of Failure Behavior of Structures, Monthly Journal of Institute of Industrial Science, The University of Tokyo, Vol.51, No. 11, pp. 773-776, 1999 (In Japanese). Share [symple_box...
« Older Entries

Categories

  • Bulletins
  • Conferences
  • Journals
  • Other Publications
  • Thesis
  • Uncategorized

Recent Posts

  • Modelling the in-plane/out-of-plane interaction of brick and stone masonry structures using Applied Element Method
  • Reliability of collapse simulation – Comparing finite and applied element method at different levels
  • Research and Practice on Progressive Collapse and Robustness of Building Structures in the 21st Century
  • Using the Applied Element Method to simulate the dynamic response of full-scale URM houses tested to collapse or near-collapse conditions
  • The Applied Element Method and the modelling of both in-plane and out-of-plane response of URM walls

Archives

  • Applications
  • Publications
  • Resources
  • Contact
  • Policies
  • RSS
© 2004-2020 Applied Element Method | Powered by AEM - Advanced Nonlinear Dynamic Numerical Analysis