Applied Element Method (AEM)
  • Home
  • Applications
    • Structural Vulnerability Assessment
    • Performance Based Design
    • Glass Performance Analysis
    • Forensic Structural Engineering
    • Demolition Analysis
    • Visual Effects
  • Publications
    • Journals
    • Conferences
    • Bullitins
    • Other Publications
  • Resources
Select Page

Consideration of Poisson’s Ratio Effect in Structural Analysis Using Elements with Three Degrees of Freedom

by Applied Element Method | Mar 30, 1998 | Bulletins

K. Meguro, H. Tagel-Din. “Consideration of Poisson’s Ratio Effect in Structural Analysis Using Elements with Three Degrees of Freedom.” BULLETIN OF EARTHQUAKE RESISTANT STRUCTURE RESEARCH CENTER, INSTITUTE OF INDUSTRIAL SCIENCE, THE UNIVERSITY OF...

A New Simple and Accurate Technique for Failure Analysis of Structures

by Applied Element Method | Mar 30, 1998 | Bulletins

Anew method for failure and post failure analysis of structures is proposed. A structure is modeled as an assembly of distinct elements. These elements are connected by distributed springs in both normal and tangential directions. The main objective of this paper is...

A New Simple and Accurate Technique for Failure Analysis of Structures

by Applied Element Method | Mar 30, 1998 | Bulletins

A new method for failure and post failure analysis of structures is proposed.  A structure is modeled as an assembly of distinct elements.  These elements are connected by distributed springs in both normal and tangential directions. The main objective of this paper...

Consideration of Poisson’s Ratio Effect in Structural Analysis Using Elements with Three Degrees of Freedom

by Applied Element Method | Mar 28, 1998 | Bulletins

A simple and efficient technique for nonlinear analysis of strucutres was developed and verified by the authors. The results showed good agreement in following the initiation, location and propagation of cracks and in calculating the failure load.  One of the main...

3-Dimensional Applied Element Simulation of Failure Behavior of Structures

by Applied Element Method | Nov 30, 1997 | Other Publications

K. Meguro, H. Tagel-Din. “D3-Dimensional Applied Element Simulation of Failure Behavior of Structures.” MONTHLY JOURNAL OF INSTITUTE OF INDUSTRIAL SCIENCEVOL.51, NO. 11, PP. 773-776 (1997). In Japanese   Share [symple_box color=”gray”...
« Older Entries
Next Entries »

Categories

  • Bulletins
  • Conferences
  • Journals
  • Other Publications
  • Thesis
  • Uncategorized

Recent Posts

  • Modelling the in-plane/out-of-plane interaction of brick and stone masonry structures using Applied Element Method
  • Reliability of collapse simulation – Comparing finite and applied element method at different levels
  • Research and Practice on Progressive Collapse and Robustness of Building Structures in the 21st Century
  • Using the Applied Element Method to simulate the dynamic response of full-scale URM houses tested to collapse or near-collapse conditions
  • The Applied Element Method and the modelling of both in-plane and out-of-plane response of URM walls

Archives

  • Applications
  • Publications
  • Resources
  • Contact
  • Policies
  • RSS
© 2004-2020 Applied Element Method | Powered by AEM - Advanced Nonlinear Dynamic Numerical Analysis